|
Untitled Document
|
| |
NON-METALLIC GASKETS |
| |
 |
JAMES WALKER - SENTINEL®
Our general purpose jointing with potable water approval
1. Compressed aramid fibre with nitrile binder.
2. Outstanding performance for its class.
3. Replaces CAF for most duties up to 400°C.
4. WRAS approved for potable water duties.
5. Exceeds BS7531 Grade Y requirements. |
| |
 |
JAMES WALKER - GASKOID JOINTINGS
1. Economical and fuel resistant
2. Economical cellulose-based material.
3. For oil/fuel pumps, carburettors, gear casings, etc.
4. Meets European and US motor manufacturers'
requirements, plus US Federal & Military specs. |
| |
 |
JAMES WALKER - NEBAR® RED
For higher pressure duties
1. High quality blend of cork and polychloroprene.
2. For switchgear and transformer applications.
3. High resistance to mineral oils.
4. Operates at up to 110°C in liquids. |
| |
 |
JAMES WALKER - NEBAR® BROWN
1. High grade, general purpose
2. High quality general purpose grade.
3. Used in automotive, engineering and electrical industries.
4. Operates at up to 110°C in liquids. |
| |
 |
JAMES WALKER - FLUOLION® ENVELOPE GASKETS
Three designs for chemically aggressive media
1. Resillient fibre material in a thin PTFE cover.
2. For gaskets where aggressive chemicals would
destroy sealing integrity of fibre materials.
3. Custom-made to suit your application. |
| |
 |
RUBBER GASKETS
For your high-integrity duties
1. Natural rubber NR
2. Nitrile rubber NBR
3. Chloroprene CR (Neoprene)
4. Butyl IIR
5. Ethylene propylene EPDM (terpolymer)
6. Silicone VMQ, PVMQ, MQ, PMQ
7. Fluorosilicone FMQ
8. Fluoroelastomer FKM (dipolymer)
9. Kalrez® perfluoroelastomer FFKM |
| |
 |
TOPOG-E GASKETS
Technical Information
1. 180 psi steam (13 bar) 193°C
2. Average service life 12 months (above conditions)
3. Potentially longer service under less arduous conditions
Resistant to: steam, hot water, cold water and water
treatment chemicals.
Typical Applications: Handholes, Manholes and
Inspection Openings. |
| |
 |
FLUOLION (PTFE) GASKETS SHEET
Virgin, expanded or filled PTFE
1. Gaskets for food, phamaceuticals or potable water.
2. Made from suitably approved Fluolion® PTFE.
3. Expanded PTFE for damaged or fragile flanges.
4. Filled Fluolion® for its mechanical properties. |
| |
|
| |
